Charge control SCR, integrated circuit, relay, charge control potentiometer are all imported from famous brand which with good quality and reliable and durable
In the production of steel, especially in the production of bars, the fixing method of the finished signs is generally to bind the signs on both ends with wire or steel strips, so that the signs are easily lost during the handling process, and the manufacturers are provided with counterfeiting opportunities. At the same time, the bundles of bars are generally placed in the process of production, sale and storage. The relevant technical parameters of the signs are unrecognizable and the calibration is difficult to correct. Sign welding machine can solve the above-mentioned problems.
The welding nail is placed in the welding machine gun, the label is hung on the welding nail, and the welding label is welded to the end surface (cross section) of the rod. Formed once and welded firmly. The above practices are as follows:
1.Because the sign is welded directly with the welding nail, it is not easy to fall off.
2.The sign is welded to the end face of the bundle of bars, which is not easily squeezed during production, handling and storage, and is easy to identify and correct.
3.Easy to use, it can be welded to the end of the bar in an instant after charging for 1-2 seconds.
4.The operation is simple, and the average worker can learn in a few minutes, greatly improving work efficiency.
|Energy storage Pattern||Electrolytic capacitor||Electrolytic capacitor|
|Input Rated current||5A||5A|
|Outer Covering||Steel Covering powder spraying|
|Class of safety protection||IP31||IP31|
|Length of welding gun||Maximum 202mm|
|Cable length||4 Meters (can be extended)|
|Capacitor life||100,000 times||500,000 times||1 million times||100,000 times|